Catalytic Flammable Gas Sensors (Pellistors)
|
|
Part No. |
Brief Description |
Download Links |
|
NP-30 |
General purpose catalytic pellistor sensor for use
in Fixed Gas Detection Systems. Poison resistant. Supplied as
matched pairs, mounted on twin TO4 size headers.
|
 |
|
NP-30S |
Similar toNP-30 in power rating, but lower cost device, mounted in a
single header enclosure. |
|
|
NP-17 |
General purpose catalytic pellistor sensor for use
in Fixed Gas Detection Systems. Poison resistant. Supplied
as matched pairs, mounted on twin TO4 size headers.
|
|
|
NP-17S |
Simialr to NP-17 in power rating, but lower cost device, mounted in a
single header enclosure. |
|
|
NP-18 |
General purpose catalytic pellistor sensor for use
in Fixed Gas Detection Systems. Poison resistant. Supplied
as matched pairs, mounted on twin TO4 size headers.
|
|
|
NP-18S |
Similar to NP-18 in power rating, but lower cost device, mounted in a
single header enclosure. |
|
|
NP-ANS |
Special Purpose catalytic pellistor sensor
designed to monitor low LEL levels of Ammonia.
As NP-AN, but mounted in a lower cost, single
header enclosure |
|
|
NP-AHS |
Special Purpose catalytic pellistor sensor
designed to monitor low LEL levels of Hydrogen.
As NP-AH, but mounted in a lower cost, single
header enclosure |
|
|
NP-AC |
Special Purpose catalytic pellistor sensor
designed to monitor low LEL levels of
Acetylene. Poison resistant. Supplied as matched pairs, mounted on
twin TO4 size headers. |
|
|
NP-10S |
Low
power single header pellistor for portable
instruments, explosimeters and cap-lamp
detectors |
|
|
NP-13S |
Low power single header pellistor for portable instruments,
explosimeters and cap-lamp detectors |
|
|
ATEX
Certified Combustible
Heads for portables |
|
Part No. |
Brief Description |
Download
Links |
|
NET-4-10S |
Miniature ATEX Approved sensor block for portable
instruments. |
|
|
NET-4-13S |
Miniature ATEX Approved sensor block for portable
instruments. |
|
|
NET-5-10 |
Miniature ATEX Approved sensor block for portable
instruments. |
|
|
NET-5-13 |
Miniature ATEX Approved sensor block for portable
instruments. |
|
|
ATEX
Certified Flameproof
Gas Detection Heads |
|
Part No. |
Brief Description |
Download
Links |
|
NET-3x-30 |
2-Part Stainless Steel collapsible Gas Detection
Head, complete with NP-30 Pellistor Gas
Sensor. Sensor fully replacable in the
field. Choice of M20, M25, ¾" NPT, 1" NPT
threads. Full Range of accessories
available. ATEX Approved. |
|
|
NET-3x-17 |
2-Part Stainless Steel collapsible Gas Detection
Head, complete with NP-17 Pellistor Gas
Sensor. Sensor fully replacable in the
field. Choice of M20, M25, ¾" NPT, 1" NPT
threads. Full Range of accessories
available. ATEX Approved.
|
|
|
NET-2x-30S |
Single Part, low cost Stainless Steel Gas Detection
Head, complete with NP-30S Pellistor Gas
Sensor. Choice of , ¾" NPT or 1" NPT
threads. ATEX Approved.
|
|
|
NET-2x-17S |
Single Part, low cost Stainless Steel Gas Detection
Head, complete with NP-17S Pellistor Gas
Sensor. Choice of , ¾" NPT or 1" NPT
threads. ATEX Approved.
|
|
|
NET-2X-ANS |
Single Part, low cost Stainless Steel Gas Detection
Head, complete with NP-ANS Pellistor Gas
Sensor. Special Application for ammonia
monitoring. Choice of , ¾" NPT or 1"
NPT threads. ATEX Approved.
|
|
|
NET-3X-AN |
2-Part Stainless Steel Gas Detection collapsible
Head, complete with NP-ANS Pellistor Gas
Sensor. Special Application for ammonia
monitoring. Choice of , ¾" NPT or 1"
NPT or M20 mounting threads. ATEX
Approved. |
|
|
NET-2X-AHS |
Single Part, low cost Stainless Steel Gas Detection
Head, complete with NP-ANS Pellistor Gas
Sensor. Special Application for Hydrogen
monitoring. Choice of , ¾" NPT or 1"
NPT threads. ATEX Approved.
|
|
|
NET-3X-AH |
2-Part Stainless Steel Gas Detection collapsible
Head, complete with NP-ANS Pellistor Gas
Sensor. Special Application for Hydrogen
monitoring. Choice of , ¾" NPT or 1"
NPT or M20 mounting threads. ATEX
Approved. |
|
|
NET-2x-CO |
NET-2 Gas Detection Head fitted with NT-HS Electrochemical
CO Gas Sensor. |
|
|
NET-3x-CO |
NET-3 Gas Detection Head fitted with NT-CO Electrochemical
CO Gas Sensor. Contact Nemoto for more
details |
|
|
NET-2X-HS |
NET-3 Gas Detection Head fitted with NT-HS Electrochemical
H2S Gas Sensor. Contact Nemoto
for more details |
|
|
NET-3X-HS |
NET-3 Gas Detection Head fitted with NT-CO Electrochemical
H2S Gas Sensor. Contact Nemoto
for more details |
|
|
NET-3X |
NET-3 Sensor head supplied as an enclosure
only. Put whatever sensor you want in it
yourselves! |
|
|
CYBER® |
NET-3 Type-3 Heads supplied complete with
4-20mA and Digital RS485 (MODBUS) Outputs |
|
Electrochemical Toxic Gas Sensors
|
|
Part No. |
Brief Description |
Download
Links |
|
NT-CO |
Standard 20mm size Electrochemical
Carbon Monoxide sensor for use in Commercial and Industrial Gas
Detectors and Systems. |
|
|
NT-H2S-1 |
Standard 20mm size Electrochemical
Hydrogen Sulphide
sensor for use in
Commercial and Industrial Gas Detectors
and Systems. Standard range
(0-100ppm) for general purpose
occupational monitoring |
|
|
NT-H2S-2 |
Standard 20mm size Electrochemical
Hydrogen Sulphide
sensor for use in
Commercial and Industrial Gas Detectors
and Systems. Slightly higher range
(0-200ppm) for
special applications |
|
|
NT-H2S-3 |
Standard 20mm size Electrochemical
Hydrogen Sulphide
sensor for use in
Commercial and Industrial Gas Detectors
and Systems. High range (0-500ppm) for special
applications. |
|
|
NT-CO-2F |
Low cost 3-Electrode
Carbon Monoxide
sensor for use in Disposable Portable
Instruments. Range 0-500ppm, 6 months
working life |
|
|
NT-HS-2F |
Low cost 3-Electrode Carbon
Hydrogen Sulphide
sensor for use in Disposable
Portable Instruments. Range 0-100ppm, 6
months working life |
|
|
NT-NO2 |
Standard 20mm size Electrochemical
Nitrogen Dioxide sensor for use in Commercial and Industrial Gas
Detectors and Systems. |
|
|
NT-NH3 |
Standard 20mm size Electrochemical
Ammonia sensor for use in Commercial
and Industrial Gas Detectors and Systems. |
|
Transmitter Products
|
|
Part No. |
Brief Description |
Download
Links |
|
CYBER® |
Nemoto Gas
Sensor supplied with pcb to drive sensor and
convert its signal to a standard mV, 4-20mA,
and RS485 (MODBUS Outputs |
|
